The Brim® Cinny for ARRI
Cinny by TheBrim® is a final color oriented, subtractive color science model, "Log to Log" LUT for use as a ARRI LogC alternate. Designed to approximate a technical film scan. For more info go to the SUCOMO LUTs main page. Format: .CUBE / Size: 64x64x64
- Cinny for ARRI expects ARRI Wide Gamut/LogC on input.
- Apply exposure changes before / underneath the LUT. We advise affecting only the luminance with these exposure changes, without changing the saturation levels or chrominance levels.
- In case of Out-of-Gamut / Edge-of-Gamut colors correct either the color saturation level or luminance level of that specific color before / underneath the LUT.
- For general best performance and in case of "banding" or other artefacting within DaVinci Resolve be sure to switch to an appropriate LUT interpolation algorithm. You can do this in DaVinci Resolve by going to "Settings" then to the “Color Management“ tab, under “3D Lookup Table Interpolation” switch to “Tetrahedral”.
Current Version: Block 1